Glassmaker's fixture BM BOY 05
"tramping device"
Using this fixture in manual production of blown glass results in substantial reduction of labour. Last but not least, there is a substantial reduction in consumption of water because the BM BOY is equipped with a closed cooling circuit. The main difference of this fixture, compared to other similar products, consists in a profound simplification of the mould mounting. This also results in much shorter time necessary for the mould exchange.
| TECHNICAL DATA | ||
|---|---|---|
| Depth of the machine | 830 |
mm |
| Width of the machine | 1080 |
mm |
| Height of the machine | 870 |
mm |
| Approximate weight (cooling water excluded) | 145 |
kg |
| Height of the upper level of the tramp platform with the pedals (can be adjusted continuously to match the height of operational platform) | 800-965 (750-915) |
mm |
| Height of the mould platform (adjustable continuously) | 310 - 500 |
mm |
| Maximum angle of the mould opening (adjustable in steps) | 78°, 90°, 106° |
mm |
| Electric power supply | 1+N+PE,
50Hz, 230 V |
|
| Input | 0,22 |
kVA |
| Switchboard protection | IP 54 |
|
| Air pressure (consumption max. 4 l/min) | 0,5 - 0,6 |
Mpa |
| Cooling liquid (closed water circuit) | 30 - 35 |
L |
| Maximum flow of the cooling water | 0,45 |
l/s |
